05-15-2015, 08:40 PM
Ok, doveman, one more question: You said the HC05 should be wired like this:
Pro Micro to HC05: Pin 9 to Key, Pin 10 (RX) to TX and Pin 14 (TX) to RX
Are you sure about pins 10 and 14 ? The sketch uses Serial1, which is supposedly pins 0 and 1
Pro Micro to HC05: Pin 9 to Key, Pin 10 (RX) to TX and Pin 14 (TX) to RX
Are you sure about pins 10 and 14 ? The sketch uses Serial1, which is supposedly pins 0 and 1