Comrades in Arms Discussion Board
[CiA] Installing ACRE2: Instructions - Printable Version

+- Comrades in Arms Discussion Board (http://ciahome.net/forum)
+-- Forum: Comrades in Arms Life (http://ciahome.net/forum/forumdisplay.php?fid=3)
+--- Forum: CiA Addon Requirements & Dedicated Servers (http://ciahome.net/forum/forumdisplay.php?fid=7)
+--- Thread: [CiA] Installing ACRE2: Instructions (/showthread.php?tid=3653)



[CiA] Installing ACRE2: Instructions - Variable - 09-24-2017

If you encounter any difficulties with the following, contact us here or in our Discord server and we will assist you.

Installation Instructions
  1. Download the ACRE2 addon from Github (the Zip version) [required only if you handle your mods manually]
  2. Extract the @acre2 folder to your Arma 3 folder [required only if you handle your mods manually
  3. Add @ACRE2 to your startup parameters [required only if you handle your mods manually
  4. Launch Arma with the mod, ACRE will now automatically copy the necessary plugin to your Teamspeak installation. You should be greeted by the following prompt, click ok:
[Image: jDS1Q8I.jpg]

Teamspeak Settings
  1. In TeamSpeak go to Tools > Options > Addons (side tab) > Plugins (upper tab) > and make sure ACRE2 plugin is enabled and TFAR plugin is disabled. You might have to select "Reload" first in the ACRE2 plugin to be able to enable it.
  2. Uncheck the box in Teamspeak that says "Delay releasing push-to-talk" (Options > Capture > Advanced Options)
  3. Do not use "Voice Activation Detection while using Push-To-Talk". This option is in your capture device settings under Advanced Options in your Teamspeak Client. If it is checked you won't be able to transmit over the radio.

In-game control settings (Controls > Addons > ACRE2):
  1. Unmap the "Default Radio Key" mapping.
  2. Map your short-range radio key to "Alt Radio 1 Key", your long range to "ALT Radio 2 key"
  3. Map your "Volume" key to your preference.
  4. Delete all the other mappings
Arma3Sync users be advised: By using Arma3Sync, Arma will always run as admin. This means you will also have to run TeamSpeak as admin to avoid issues with ACRE.


RE: [CiA] Switching to ACRE2: Instructions - Verstanden - 09-26-2018

since I ran into that issue I'll post it here:
Do not use "Voice Activation Detection while using Push-To-Talk". This option is in your capture device settings under Advanced Options in your Teamspeak Client. If it is checked you won't be able to transmit over the radio.


[CiA] Switching to ACRE2: Instructions - Variable - 09-27-2018

Thanks Verstanden, OP edited!